Adapters are all made precisely. They will not fall off easily during use. It is easy to connect N to SMA Type Device. Compatible with N type and RP-SMA connectors or extension cable.
Perfect for working with antennas, wireless LAN devices, RF coaxial connector, RF coaxial cable, Wifi, handheld radios, external antenna, broadcast, telecom, CCTV, LMR, microwave applications and digital communication system.

This Adapter can have a better antenna position, don't need to bend your antenna, easy to install. Help you connect RP SMA female and SMA male connector device. Replace and extend the wifi antennas on your outdoor cameras.
Widely Suitable for FPV Drone, Extension Cable, Signal Booster, Repeaters, RF Coaxial Coax, Audio, Video, Car Aerial, Networks, Wifi router, Wifi antenna, coaxial cables, GPS, radio scanners, Wlan, Radio, Telecom and other test equipment, >1000 Times Mating Life Time.

This Adapter can have a better antenna position, don't need to bend your antenna, easy to install. Help you connect RP SMA female and SMA male connector device. Replace and extend the wifi antennas on your outdoor cameras.
Widely Suitable for FPV Drone, Extension Cable, Signal Booster, Repeaters, RF Coaxial Coax, Audio, Video, Car Aerial, Networks, Wifi router, Wifi antenna, coaxial cables, GPS, radio scanners, Wlan, Radio, Telecom and other test equipment, >1000 Times Mating Life Time.

♥ Durability& Performance: This adapter is made of pure brass to ensure it's durability and recycling usage. High quality adapter ensure no lost in signal transmission and good conductivity.
♥ Application for FPV Drone, Extension Cable, Audio, Video, Car Aerial, Networks, Wifi router, Wifi antenna, coaxial cables, radio scanners, Wlan, Radio, Telecom and other test equipment.

Feature:
1.This module is with classic low-noise amplifier tube design, the noise factor is as low as 0.6dB.
2. The gold-plated CNC shell can effectively dissipate heat and shield electromagnetism.
3. It can work in the wideband range of 50MHz-4GHz, with 17dBi high gain characteristics at 1GHz Frequency.

Application:
A) Broadband amplifier
Some broadband amplifiers do not have a direct-isolating capacitor inside, and the output end needs power supply, which requires a biaser.
Some amplifiers are internally integrated with capacitors, so no additional bias is required.
B) Optical fiber communication, laser driven
The driving current required by the laser diode is injected through the DC end of the biaser
Communication data is injected through RF terminal.

The 868M filter bandwidth is 2MHz, and the 915M filter bandwidth is 26MHz. The cut-off characteristics of these two filters are steep. It can effectively filter out out-of-band signals, reduce noise, and increase dynamic range.

Built-in intelligent transceiving detection circuit, which do not need  front-end equipment provide transceiving/switching control signals.The module works in the receiving state by default to amplify the received signal. When the front-end equipment is detected to transmit external signals, it will switch to the transmitting & amplifying state instantly . The transmission gain is manually adjustable, which is convenient for compatible wireless devices with different transmission powers.

1.Built-in TX/RX automatic switching circuit, TX/RX status can be switched independently without external control signal.
2.It works in RX status by default, and enhances the receiving signal. When the transmitting signal of the superior device is detected, the module instantly switches to the TX status.
3.The TX gain is adjustable, which is convenient to be compatible with wireless devices with different transmission powers. Compatible with various modulation methods such as LORA and FSK/ASK...

Feature:
1. Wide range of working frequency band. It can work stablely between 80MHz - 930MHz range.
2.The highest output power up to 10W (40dBm @ 24V power supply).
3. Wide range of operating voltage with 9V-24V.
4. Built-in high-precision ADC. It can detect the working voltage automatically and adjust the final transmitting power according to the working voltage.

Feature:
1. The first 5.8G signal amplifier which can adjust the gain range.
2.Transmission power is controllable. In the case of short distance you can choose a lower transmission power to save battery life.
3. Small and light, only 44mm * 27mm * 28mm.
4. Transmission Power up to 2W.
5. With double heat sink, support long-term reliable work without cooling fan.
6. Built-in high performance stabilizing module, work stable in 6V-23V.
Application: Remote control, airplane helicopter Model

Feature: Small size but extremely simple. Built-in high-speed transceiver switching automatic discrimination circuit, can switch the transceiver status automatically.  Do not need the WiFi control chip to give the control signal first, it can auto-work directly. So it is compatible with any WiFi programmes.

Application: Advertising machine, wireless network player, high-power wireless router, high-power wireless network card, high-power outdoor AP, wireless camera, etc